EN
CN
Wet Leakage Current Tester
Product description
Specifications
Download
Meet the insulation test & wet leakage current test requirements specified in 4.3(MQT03), 4.15(MQT15) clause of IEC 61215-2016, MST16, MST17 clause of IEC61730.
l Including insulation test table with high isolation level.
l With the trough to test wet leakage current test.
l The liquid temperature can be controlled with heating & chiller.
l Including a liquid conductivity tester to monitor the conductivity of the liquid.
l Including an insulation tester for leakage current.
l Acrylic material is used for the insulation trough with good visibility.
l The surface tension of the water could be checked.
l with overload, over-current, over-voltage alarm.
l Computer could read the test data.
l Temperature and humidity surround the test area could be monitored.
Item | Parameters |
Insulation test table | 2500*1500*800mm(L*W*H) |
Isolation material on the table | 20KV |
Trough size | 2500*1500*200mm(L*W*H) |
Temperature control range | 22±2℃ |
Temperature accuracy | ±1℃ |
Conductivity Tester | 500Ω·cm～1000000Ω·cm |
Basic conductivity deviation | ±1.0%FS |
Voltage range | 0～10KV |
Insulation voltage range | 0～1500V |
Current range | 0～5mA |
Resistance range | 0.1MΩ～100GΩ |
Temperature monitoring range | 0～50℃ |
Temperature accuracy | ±1℃ |
Temperature repeatability | 0.5℃ |
Humidity range | 0～100%RH |
Humidity accuracy | 5% |
Humidity resolution | 1%RH |
Surface Tensiometer range | 0～0.1N/m |
Surface Tensiometer resolution | 0.0001N/m |
Surface Tensiometer accuracy | ±2%FS |
